Aluminum nitride (AlN) powder specimens are treated by high-energy bead milling and then sintered at various temperatures. Depending on the solvent a..
Thermoelectric materials and devices are energy-harvesting devices that can effectively recycle waste heat into electricity. Thermoelectric power gen..
Al2O3-SiC ceramic composites are produced using pressureless sintering, and their plasma resistance, electrical resistance, and mechanical properties..
In the present work, we use multiwall carbon nanotubes (MWCNT) as the starting material for the fabrication of sintered carbon steel. A comparison is..
Li1.3Al0.3Ti1.7(PO4)3(LATP) is considered a promising material for all-solid-state lithium batteries owing to its high moisture stability, wide poten..
In this study, Fe-Cu-C alloy is sintered by spark plasma sintering (SPS). The sintering conditions are 60 MPa pressure with heating rates of 30, 60 a..
소결체 보다 큰 것을 확인할 수 있다. ... 실험결과 및 고찰 1) 소결체를 아르키메데스 원리를 이용하여 밀도 및 기공도를 평가한다. ... 소결체의 밀도를 Archimedes(액중 칭량법)의 원리를 이용하여 체적 밀도, 겉보기 밀도, 기공률(open porosity) 등으로 측정하여 조사한다. 3.
UO2분말에 PVA-Al(III) 착물과 AlOOH를 각각 0.03~1.0wt%를 첨가하여 소결체를 제조한 후 소결체 특성을 비교하였다. ... AlOOH가 첨가된 소결체의 경우 약 800˚C 부근에서 치밀화가 시작되었지만, PVA-Al(III) 착물이 첨가된 소결체의 경우에는 약 900˚C에서 치밀화가 시작되었다. ... 기공 크기 분포는 AlOOH가 첨가된 UO2소결체의 경우에 monomodal 형태로, 그리고 PVA-Al(III) 착물의 첨가된 소결체의 경우에는 bimodal 형태로 나타났다.
In this study, analysis on the oxidation behavior was conducted by a series of high-temperature oxidation tests at both 800oC, 900oC and 1000 in the ..
초기 결정입 크기 15μm인 W-0.2wt%Ni, 1시간 30분과 W-0.4wt%Ni, 1시간 소결체의 응력 파단 성질 및 파괴 양상을 조사하기 위해서 direct load creep ... 활성 소결체에서 Ni 첨가량이 증가함에 따라, 단위 면적당 기공의 밀도 및 크기는 작아지고, 형태는 구형화 되어 미세균열로의 전이가 어려워 응력 파단 성질이 향상되었다.
The effects of processing parameters on the flow behavior and microstructures were investigated in hotcompression of powder metallurgy (P/M) Ti-6Al-4..
효율적으로 원하는 형태의 소결체를 얻기 위해서는 원료 분말이 가능한 미세하고 균질해야 한다. ... PbWO _{4}와 ZnO-Sb _{2} O _{3} -Bi _{2} O _{3} 소결체를 제조하여 각각 연마하여 고상소결시편은 추가적으로 800℃에서 10분간의 열 에칭을 하고난 ... 두 소결체의 가장 큰 차이점은 입자의 모양과 기공의 모양, 위치가 확연히 다름을 확인 할 수 있었다. 2.Theoretical Background 2.1 하소 (calcine) 어떤
In this study, tantalum (Ta) compacts were fabricated in a spark plasma sintering (SPS) process and their microstructure and mechanical properties we..
As wrought stainless steel, sintered stainless steel (STS) has excellent high-temperature anti-corrosion even at high temperature of 800ºC and exhibi..