Insulating TaNx films were grown by plasma enhanced atomic layer deposition using butylimido tris dimethylamido tantalum and N2+H2 mixed gas as metal..
CIGS 태양전지 1 박막 태양전지란 ? ... 얇은 두께의 박막으로도 고효율의 태양전지 제조 가능하다 . ... DGIST 연구팀은 CZTS 박막 태양전지의 핵심 원리를 규명했으며 플렉시블 CZTS 박막 태양전지 효율 11.4% 를 기록하며 세계 최고의 수준을 나타냈다 .
일반적으로 진공 상태에서 진행되므로 진공 증착이라고 한다.가장 일반적인 물리적 기상 증착 방법으로 진공상태에서 높은 열을 금속원에 가해 기화한 다음 상대적으로 낮은 온도의 기판에 박막을 ... 정의와 원리진공 용기 속에 금속을 피복 하려하는 플라스틱이나 다른 물체 등을 넣고 진공 중에서 알루미늄이나 은과 같은 금속 조각들을 넣고 가열하여 증발시켜 그 증기로 물체의 표면에 박막형태로
특히 나노 박막이나 나노 빔 등 나노 스케일의 구조물에서는 표면효과의 영향을 반드시 고려하여야만 한다. ... 특히 본 논문에서는 박막구조물의 해석을 위하여 고전적인 Kirchhoff 평판이론을 바탕으로 표면효과를 고려할 수 있도록 하는 연속체 모델을 제안하고 이를 바탕으로 유한요소해석을 수행하여
이에 본 연구는 저전압에서 구동 가능한 박막트랜지스터를 위한 유기-무기 하이브리드소재 박막을 개발하며 이를 저전압 구동이 가능한 유기박막트랜지스터에 적용하였다. ... 제조된 하이브리드 게이트 유전체 박막은 우수한 절연 및 유전체 특성과 함께 소수성 표면 특성을 가질 수 있었고 펜타센 유기박막트랜지스터로 응용하여 저전압에서 구동이 되며 우수한 트랜지스터
Transparent conductive tungsten (W) doped indium oxide (In2O3; IWO) films were deposited at different substrate bias voltage (-Vb) conditions at room..
Atomic layer etching (ALE) is a promising technique with atomic-level thickness controllability and high selectivity based on self-limiting surface r..
The purpose of flow analysis is to develop a simple CFD analysis model to develop a heat transfer analysis model including transient heat transfer ch..
SK 넥실리스 자기소개서 - 1. 자발적으로 최고 수준의 목표를 세우고 끈질기게 성취한 경험에 대해 서술해 주십시오. (본인이 설정한 목표/ 목표의 수립 과정/ 처음에 생각했던 목표 달성 가능성/ 수행 과정에 서 부딪힌 장애물 및 그 때의 감정(생각)/ 목표 달성을 위..
Homogeneous liquid crystal (LC) alignment on hafnium strontium oxide (HfSrO) films prepared by sol-gel process via ion-beam (IB) bombardment was inve..
We performed this study to understand the effect of a single-crystalline anode on the mechanical properties of asdeposited films during electrochemic..
DLC 박막에 대한 문제점 3. 현재까지 진행한 실험 4. 이후 실험 진행방향 및 예상결과 1. ... DLC 박막에 대한 문제점 2. 문제점 열에 취약 Adhesion 버킹 현상 3. 현재 까지 진행된 실험 D Peak 3. 현재까지 진행된 실험 intensity ( a.u .)
봉지 분야 핵심기술 진공 유기막 증착 기술 분해 온도가 낮은 금속 유기화합물을 이용하여 낮은 온도에서 박막을 형성시키는 기술 . ... 금속 유기화합물의 유량 및 반응기의 온도와 압력을 조절하여 박막의 두께를 원자단위로 조절 가능하며 복잡한 multilayer 를 가진 반도체에 응용됨 . ... LED 블루밍 현상의 장점으로 기존 LED 보다 향상된 이미지 품질 전력 소비 감소 빠른 응답 시간 OLED 장점 이미지 품질뿐만 아니라 디스플레이 반응성 과 부드러움 OLED 박막제조기술
We investigated the effect of ZnO buffer layer on the formation of ZnO thin film by ultrasonic assisted spray pyrolysis deposition. ZnO buffer layer ..
TaNx film is grown by plasma enhanced atomic layer deposition (PEALD) using t-butylimido tris(dimethylamido) tantalum as a metalorganic source with v..
We have investigated the properties of thin film transistors(TFT) fabricated using zinc tin oxide(ZTO) thin films deposited via on-axis sputtering an..
In this study, we investigated the overpotential of precipitation related to the catalytic activity of electrodes on the initial process of electrode..