전기전자 기초실험(영문)

소개글

연세대학교 전기전자기초실험 예비 래포트입니다. 누구한테 준 적 없는 자료이구요 ~ A0 받았습니다 ~~

목차

1.Research on the below factors, as they are needed for the project
2.Think about problems that cause the errors in digital clocks and find ways to solve them

본문내용

When the input is give as the below figure, we can output the number which we want by using the seven LED. The number on the left side is expressed by 7-segment output. So we can know it. The 7-segment may show the number which we want by the proper input. We will display the clock by using the seven 7-segment. If the second would pass the 59 second, the minute could increase one by one and the second could be reset (0 second).

<중 략>

we express the clock by using AM/PM, second, minute, hour.
The `A` is meaning the morning and the afternoon is expressed by the `P`.
The hour is expressed by 01~12.
The minute is expressed by 00~59.
The second is expressed by 00~59.
The AM/PM should be inputted through the proper input.
The AM/PM should be changed from switch input.

<중 략>

We should use the logical circuits at least as possible as.
And if the clock frequency would be not constant the time could occur the delay.

참고 자료

contemporary Logic Design 2nd Edition (Randy H. Katz)
Fundamentals of Digital Logic - Vranesic and Brown