비부착 강연선과 고강도 콘크리트를 적용한 철근콘크리트외부 접합부의 내진 거동
(주)코리아스칼라
- 최초 등록일
- 2016.04.02
- 최종 저작일
- 2015.11
- 10페이지/ 어도비 PDF
- 가격 4,000원
* 본 문서는 배포용으로 복사 및 편집이 불가합니다.
서지정보
ㆍ발행기관 : 한국지진공학회
ㆍ수록지정보 : Jorunal of the Earthquake Engineering Society of Korea / 19권 / 6호
ㆍ저자명 : 권병운, 강현구
목차
1. 서 론
2. 실험체의 내진설계
2.1 실험체 개요
2.2 재료
2.3 접합부 전단강도비
2.4 접합부 구속 철근량과 간격
2.5 주근의 정착 길이
2.6 비부착 강연선
3. 실험체 세팅 및 측정 계획
3.1 실험체 세팅
3.2 가력 계획
3.3 계측 세팅
4. 내진실험 결과 및 분석
4.1 모멘트-층간변위 관계
4.2 균열 및 파괴 양상
4.3 접합부의 전단 변형
4.4 철근의 변형률
4.5 비부착 강연선의 거동
4.6 ACI 374.1-05에 따른 평가
5. 결 론
/ 감사의 글 /
/ REFERENCES /
영어 초록
In the moment frame subjected to earthquake loads, beam-column joint is structurally important for ductile behavior of a system. ACI Committee 352 proposed guidelines for designing beam-column joint details. The guidelines, however, need to be updated because of the lack of data regarding several factors that may improve the performance of joints. The purpose of this study is to investigate the seismic performance of reinforced concrete exterior joints with high-strength materials and unbonded tendons. Three specimens with different joint shear demand-to-strength ratios were constructed and tested, where headed bars were used to anchor the beam bars into the joint. All specimens showed satisfactory seismic behavior including moment strength of 1.3 times the nominal moment, ductile performance (ductility factor = at least 2.4), and sufficiently large dissipated energy.
참고 자료
없음
"Jorunal of the Earthquake Engineering Society of Korea"의 다른 논문