비용매 알코올 응고조를 이용한 폴리술폰 막의 상전이 거동 및 모폴로지 특성 연구
* 본 문서는 배포용으로 복사 및 편집이 불가합니다.
서지정보
ㆍ발행기관 : 한국막학회
ㆍ수록지정보 : 멤브레인 / 15권 / 4호
ㆍ저자명 : 박병길, 공성호, 남상용
ㆍ저자명 : 박병길, 공성호, 남상용
한국어 초록
본 연구에서는 NMP용매를 사용하여 폴리술폰 용액을 캐스팅 하고 상전이 방법으로 비대칭성 폴리술폰 막을 제조하였다. 비대칭성 폴리술폰 막 제조 시 응고조로 물과 알코올(메탄올, 에탄올, 프로판올) 수용액을 사용하였다. 폴리술폰 막의 수투과도와 다공도를 조절하는 인자로 서로 다른 용해도 계수를 갖는 알코올의 영향에 대한 특성을 평가하였다. 알코올 응고조에서 제조된 비대칭성 폴리술폰 막은 전형적인 sponge-like 구조를 나타내었으며 물 응고조에서 제조된 폴리술폰 막은 알코올 응고조에서 제조된 폴리술폰 막보다 낮은 수투과도를 나타내었다. 물과 알코올의 혼합 응고조에서 생성된 비대칭성 폴리술폰 막은 finger-like 구조와 sponge-like 구조가 혼재되어 있음을 확인할 수 있었다. 즉, sponge-like 구조의 폴리술폰 막은 상전이 속도가 감소함에 따라 다공도가 현저하게 감소함을 알 수 있었다. 그 결과 물 응고조에서 제조된 폴리술폰 막의 수투과도는 14.7 psi에서 164 [L/m2hr] 이고 메탄을 응고조와 에탄을 응고조에서 제조된 폴리술폰 막은 각각 56 [L/m2hr]과 30 [L/m2hr]를 나타내었다.영어 초록
In this study, asymmetric polysulfone membranes were prepared by the phase inversion method and the casting solutions were containing N-methyl-2-pyrrolidone (NMP) as a solvent. Deionized water and various alcohols(methanol, ethanol, and propanol) were used as a coagulation medium in preparing asymmetric polysulfone membranes. This study investigates the effect of alcohol coagulants having different solubility parameters as a pore-former on the construction of porous structures and their pure water permeation properties. Asymmetric polysulfone membranes immersed in the pure alcohol coagulation bath solution showed the typical sponge-like structures and the reduced water permeability as compared with those of polysulfone membranes precipitated in the pure water coagulation bath solution. In the water/alcohol mixtures, asymmetric polysulfone membranes showed the finger-like structures with the sponge-like structures. Therefore, the sponge-like structure of polysulfone membrane was formed under the delayed demixing systems while the porosity of membrane was decreased significantly. The water permeability of polysulfone membrane precipitated in the pure water coagulant showed 164 [L/m2hr] at 14.7 psi. In case of polysulfone membranes prepared in the pure methanol and ethanol coagulant, they showed the water permeability of 56 and 30 [L/m2hr], respectively.참고 자료
없음"멤브레인"의 다른 논문
- 폴리이서설폰 중공사모듈을 이용한 연소배가스로부터 이산화탄소 분리회수를 위한 다단계 막분리공정 연구10페이지
- 연료전지를 위한 술폰화된 Perfluorocyclobutyl Biphenylene 고분자 전해질막8페이지
- 고온 수증기 전해 수소제조를 위한 전해질 막의 전기화학적 특성 고찰6페이지
- 무기 콜로이드 현탁액의 십자류 정밀여과에 의한 투과유속의 감소거동11페이지
- Silica막 반응기를 이용한 Dimethyl Ether 합성에 관한 연구8페이지
- 역삼투 분리막의 표면개질을 이용한 내염소성 향상에 관한 연구10페이지
- 질량분석법에 의한 내분비계 장애물질의 분석과 막 여과에 의한 제거13페이지
- 막 오염 저항성이 우수한 나노 소재 정밀 여과막의 특성 연구8페이지
- 약물방출시스템 적용을 위한 락타이드/히아루론산 고분자 막의 제조8페이지
- 고분자/층상실리케이트 나노복합체의 분리막에의 응용17페이지