통신-DSB, AM matlab 구현
- 최초 등록일
- 2007.03.05
- 최종 저작일
- 2007.03
- 7페이지/ 한컴오피스
- 가격 3,000원
소개글
가. Choose any of multi-tone signal and draw it time-domain
나. Represent the modulated signal of DSB and AM in time-domain,
respectively.
다. Find FT of DSB and AM, respectively.
라. Draw PSD of DSB and AM, respectively.
목차
1. Brief of problem
2. Purpose
3. Approach
4. Result with Discussion
5. Summary
본문내용
%%% DSB라는 변수는 DSB 변조에서 주파수가 397.2인 반송파 Xc(t)이다.
%%% Xc(t) = m(t)*Ac*cos(2*pi*fc*t)에서 Ac=1, fc=397.32로 잡았다.
%% 원신호 message signal
figure(1); plot(dst,y);axis([-0.3 0.3 -1.5 1.5]);
xlabel(`Time[sec]`);
ylabel(`Magnitude`);
%% 변조신호 Xc(t) 나타내기
figure(2); plot(dst,DSB);axis([-0.3 0.3 -1.5 1.5]);
xlabel(`Time[sec]`);
ylabel(`Magnitude`);
%%%%%%%%%% 변조신호의 FT %%%%%%
FT=abs(fft(DSB))/length(DSB); % DSB의 FT
shiftFT=abs(fftshift(FT)); % 양측파대로 나타내기
f=dst/dt/dt/length(DSB);
figure(3); plot(f,shiftFT);
xlabel(`Frequency[Hz]`);
ylabel(`Magnitude`);
axis([-500 500 0 0.15]); % 주파수가 400Hz근처이므로 500까지 잡았다.
%%%%%%%%% Power Spectral Density 구하기 %%%%%%%%%
figure(4);
periodogram(DSB,[],2048,Fs); % 2048개의 샘플
% 2048 : number of FFT points used to calculate the PSD estimate
% [ ] : default window
참고 자료
없음