스테인레스강,STS
- 최초 등록일
- 2006.10.02
- 최종 저작일
- 2006.06
- 15페이지/ 한컴오피스
- 가격 2,000원
소개글
핵심내요을 전공서적을 직접 정리하여 만든 레포트입니다.
인터넷에 올라온것 배낀 것과는 질적으로 다릅니다.
높은 만족도를 드릴거라 생각합니다.
현재까지 40회 가까이 판매 되었습니다.^__^
목차
< 개요 >
Abstract
1. 서 론(Introduction
2. 스테인리스의 정의
3. 스테인리스강 개발의 역사
4.스테인리스강의 분류
4.1. 페라이트계 스테인리스강
4.2.마르텐사이트계 스테인리스강
4.3.오스테나이트계 스테인리스강
4.4석출 경화계 스테인리스강
4.5.스테인리스강의 열처리
5. ,STS의 특성
5.1. Ferrite계
5.2. Martensite계
5.3. Austenite계
5.4. Ferrite+Austenite계
5.5. STS 304의 특성
5.6. 스테인리스강의 내식성
5.7. 취성, 입계부식 및 응력부식균열
6. STS의 용도
6.1.STS의 용도(열연강종)
6.2. STS의 용도(냉연강종)
6.3. 용도상으로 본 특징
6.4. 용도별로 본 각계통의 스테인리스의 특징
6.5.적용 및 용도
7. STS 상태도
8.STS의 제조공정
9.실험
9.1실험계획
9.2실험결과
10.기타
11.참고문헌
본문내용
Abstract
Stainless steel has very corrosion resistance. The beginning of the stainless steel is that H. Brearley made a corrosion resisting steel added the chrome. To be used today is divided greatly with the Fe-Cr to the Fe-Ni-Cr ferrite stainless steel. The former is to put many melting chrome in the body-centered cubic structure of the steel at room temperature. The chrome stainless steel added 13 weight percents is famous. For the heat-resisting alloy the chrome stainless steel added 27 weight percent is used. 12~13 wt% chrome stainless steels become the martensite phase by the quenching. So they are called also the martensite stainless steels. The later is to be stabilized at room temperature after adding many nickel and chrome in the face-centered cubic structure of the steel at 900~1,400℃. It is 18-8, 18%chrome and 8%nickel alloy and 17-7PH(precipitation hardening), 17%chrome and 7%nickel alloy as the elastic materials. In this paper, analysis about the organization changes of STS 304, the 18Cr-8Ni steel by heat treatments was reported.
참고 자료
1) 김정근, 김기영, 박해웅 著 (저)
제목 : 금속 현미경 조직학
1998년 출판(도서출판 골드)
2) 양훈영 著 (저)
제목 : 신금속 재료학
2003년 출판(문운당)