알칼리 활성화에 의한 고로슬래그 경화체의 제조 연구
(주)코리아스칼라
- 최초 등록일
- 2016.04.02
- 최종 저작일
- 2015.06
- 6페이지/ 어도비 PDF
- 가격 4,000원
* 본 문서는 배포용으로 복사 및 편집이 불가합니다.
서지정보
ㆍ발행기관 : 한국유화학회
ㆍ수록지정보 : 韓國油化學會誌 / 32권 / 2호
ㆍ저자명 : 신재란, 임윤희, 이주열, 박병현
한국어 초록
고로슬래그는 유동성 장기강도 및 내구성이 좋고 수화열을 낮아 경화체를 제조함에 따른 적용성이 우수하지만, 몇 가지 문제점을 갖는다. 시공시간이 증가하고 회전속도가 늦고 초기강도가 낮다. 본 연구에서는 알칼리활성화를 이용한 경화체 제조에 있어 필요한 알칼리 수용액을 해수담수화 과정에서 발생하는 농축수의 전기분해를 통하여 공급하였으며. 알칼리 수용액을 이용하여 고로슬래그와 경화체를 제작하였다.
결과는 다음과 같이 요약할 수 있다 : 모르타르의 압축강도는 NaOH 2%이하일 때는 감소하고, 6% 이하까지는 증가한다. 그리고 NaOCl의 함량이 증가할수록 압축강도도 증가한다. 그러나 NaCl이 모르타르에 존재하면 초기강도보다 재령 28일차 강도는 감소하게 된다.
영어 초록
Blast Furnace Slag is good for enhancing the qualities of concrete such as reducing hydration heat increasing fluidity, long-term strength and durability, but it has some problems: construction time is increased or the rotation rate of form is decreased due to low development of early strength.
In this study, an aqueous alkali solution for alkali activated reaction was obtained by the electrolysis using concentrated water discharged from seawater desalination process. Prepared aqueous alkali solution was applied to produce mortars using blast furnace slag.
The results can be summarized as follows : For the mortar, compressive strength was decreased below 2% of NaOH and increased below 6% of NaOH. And compressive strength was increased gradually with increasing NaOCl contents. However, NaCl contents of mortars caused a decrease of 28days strength above early strength.
참고 자료
없음
"韓國油化學會誌"의 다른 논문
더보기 (5/10)