• LF몰 이벤트
  • 캠퍼스북
  • 파일시티 이벤트
  • 서울좀비 이벤트
  • 탑툰 이벤트
  • 닥터피엘 이벤트
  • 아이템베이 이벤트
  • 아이템매니아 이벤트

정압 기체베어링 설계 및 제작

(주)코리아스칼라
최초 등록일
2016.04.01
최종 저작일
2010.12
6페이지/파일확장자 어도비 PDF
가격 4,000원 할인쿠폰받기
다운로드
장바구니

* 본 문서는 배포용으로 복사 및 편집이 불가합니다.

서지정보

발행기관 : 한국기계기술학회 수록지정보 : 한국기계기술학회지 / 12권 / 4호
저자명 : 박국남, 노병후, 우상익, 오수열

목차

Abstract
기호설명
1. 서론
2. 기체베어링
2.1 정압기체베어링 개요
2.2 기체베어링의 장단점
3. 정압 기체베어링 설계
3.1 정압 기체베어링 설계
4. 정압 기체베어링 제작 및 성능시험
4.1 정압기체베어링 제작
4.2 정압기체베어링 성능시험
5. 결론
참고문헌

영어 초록

In neutron beam research, it is necessary for the shielding block and experimental equipment a dance floor in a nuclear reactor to travel in a fixed direction with little friction. However, precise travel is difficult to achieve due to factors such as vibration or gear backlash. We have imported air bearings from more developed nations to perform the role of moving instruments. In the beginning, an air bearing for use in three-dimensional measuring instruments similar to an air bearing was used; however, the performance was found to be insufficient. Accordingly, we collected data and conducted reverse engineering on this type of thrust pad. Through this process, it was confirmed that two issues were influencing the performance: the slant of the bottom of the air bearing and the bottom outside edge of the air bearing plate. The air bearing begins to move at 5 bar and moves smoothly without interruption at 7 bar. The result of this process was the development of a thrust pad which is superior in performance to the imported product and is being used in neutron beam research. We anticipate that this air bearing which has been developed will be used for experimental equipment which requires this type of precision in the future.

참고 자료

없음

자료문의

제휴사는 별도로 자료문의를 받지 않고 있습니다.

판매자 정보

코리아스칼라는 정직과 신뢰를 기반으로 학술단체 발전에 도움을 드리고자 하는 기업입니다. 본 사는 본 사가 자체 개발한 솔루션을 통하여 보다 효율적인 업무 관리 뿐만 아니라, 학술지의 데이터베이스화, ARCHIVE를 돕습니다. 본 사의 One Stop Service를 통해 국제적인 학술단체로 함께 도약 할 수 있다고 믿습니다.

주의사항

저작권 본 학술논문은 (주)코리아스칼라와 각 학회간에 저작권계약이 체결된 것으로 AgentSoft가 제공 하고 있습니다.
본 저작물을 불법적으로 이용시는 법적인 제재가 가해질 수 있습니다.
환불정책

해피캠퍼스는 구매자와 판매자 모두가 만족하는 서비스가 되도록 노력하고 있으며, 아래의 4가지 자료환불 조건을 꼭 확인해주시기 바랍니다.

파일오류 중복자료 저작권 없음 설명과 실제 내용 불일치
파일의 다운로드가 제대로 되지 않거나 파일형식에 맞는 프로그램으로 정상 작동하지 않는 경우 다른 자료와 70% 이상 내용이 일치하는 경우 (중복임을 확인할 수 있는 근거 필요함) 인터넷의 다른 사이트, 연구기관, 학교, 서적 등의 자료를 도용한 경우 자료의 설명과 실제 자료의 내용이 일치하지 않는 경우

이런 노하우도 있어요!더보기

최근 본 자료더보기
  • 프레시홍 - 전복
탑툰 이벤트
정압 기체베어링 설계 및 제작
  • 레이어 팝업
  • 레이어 팝업
  • 레이어 팝업
  • 레이어 팝업
  • 레이어 팝업
  • 레이어 팝업